Cleaning grouts can be challenging if you don’t have the right tools and strategy. Deep-seated dirt may need aggressive scrubbing. Instead of tiring yourself on dysfunctional DIY methods, we’ve written these grout cleaning tips for you. It’s a short guide to save you from the hassle.
What you need for the task:
-Stiff bristle brush
-A pair of gloves
What to do
Step 1. Prepare the area you’re going to clean. Give your grout a head start by spraying hot water and scrubbing it with a stiff bristle brush. If you don’t have a special brush, an old toothbrush can be a great grout cleaner tool.
Remove any dirt and grime that will come off. Always scrub in a circular manner and make sure that you follow the grout line.
Step 2. Prepare the solution. Mix two parts of baking soda with one part of hydrogen peroxide. You can add a few drops of dish soap if you’re cleaning an area exposed to grease and food leftovers. Make sure that your mixture has a paste consistency. This is a great alternative if you don’t have the budget for the best grout cleaner on the market.
Step 3. Put on a small amount of the paste mixture into the grout and let it set on it for at least 10 minutes. After that, scrub the grout lines. Make sure that you wipe off any dirt that will come off so it wouldn’t mix with the cleaning agent.
Step 4. Rinse the area. After the first application and brushing, rinse the tiles using the same dish detergent you’ve used earlier. It’s recommended to use hot water and a sponge for this part. Make sure that you’ve removed all the paste mixture.
Step 5. Repeat the process if need be. If there’s still obvious dirt, you can re-apply the mixture and repeat the process we’ve just discussed.
Step 6. Seal the grout. To save you from the hassle of repeatedly cleaning your tile grout, you can seal your effort with a grout sealer. This will serve as a shield against deep-seated dirt.
Apply the sealer and let it set for 24 hours before using the tiled area again. You may need to re-seal your grout depending on how often you use the area and what type of sealer you’ve applied. It’s best to refer to the label of the sealer.
If you have a tiled bathroom, you can save yourself from intense scrubbing by running a squeegee all over the tiles. This will make your bathroom look fresh while preventing the buildup of molds and mildew. This is the easiest way to clean grout without scrubbing.
Lastly, never let dirt accumulate on your tile’s grout for long. You can perform these grout cleaning tips regularly to arrest the possible buildup of hard-to-remove grimes.
If this failed, feel free to call Calgary Tile Installers to help with your grout cleaning. They have the right tools and products to help remove grout dirt in just a few minutes.